TransPacificTelecom

Contact Us
RatesContact TPTMy VIVOSite MapTPT HomeOrder Now
VIVO SoftwareVoice ServicesAlliance PartnersAgent ProgramsSupportAbout TPT
ATA 186 Hardware Specifications
Technical Specifications for Cisco ATA 186

Description Specification
Control protocols H.323 v.2 SIP RFC 2543 bis
Provisioning DHCP (RFC 2131) Voice prompt configuration via telephone keypad (IVR menu) Basic boot provisioning (TFTP Profiling) Dial plan provisioning
DTMF DTMF tone detection and generation
Out-of-band DTMF H.245 out-of-band DTMF (H.323) RFC 2833 AVT tones (SIP)
Transmission protocols TCP/UDP/IP
Line echo cancellation One line echo canceller (LECs) for each port 8 ms echo length Non-linear echo suppression (ERL greater than 28 dB for = 300 to 3400 Hz) Convergence time = 250 ms ERLE = 10 to 20 dB Double-talk detection
Voice features VAD (silence suppression) CNG (comfort noise generation) Dynamic jitter buffer (adaptive and configurable)
Physical interfaces
Ethernet RJ-45 8-wire connector, IEEE 802.3 10Base-T standard
Analog Telephone/PBX Two Rj-11 FXS voice ports
Power 5 VDC power connector
Ringer equivalence number (REN) 5 REN per RJ-11 FXS port
Indicators Function button with integrated status indicator Activity LED indicating network activity
Dimensions (H x W x D) 6.5 x 6 x 1.5 in. (16.5 x 15.25 x 3.8 cm)
Weight 15 oz (425 gm)
Operating temperature 32 to 122°F (0 to 50°C)
Storage temperature -22 to 149°F (-30 to 65°C)
Relative humidity 10 to 90% non-condensing, operating and non-operating/storage
Safety Recommendations

To ensure general safety, follow these guidelines:

Do not open or disassemble this product.
Do not get this product wet or pour liquids into this device.
Copyright © 2002 TransPacificTelecom, Inc. All Rights Reserved.
Privacy Policy | Legal Notices | Service Agreement